eBook
Available on Compatible NOOK devices, the free NOOK App and in My Digital Library.
Related collections and offers
Overview
Product Details
| ISBN-13: | 9781546209881 |
|---|---|
| Publisher: | AuthorHouse |
| Publication date: | 10/20/2017 |
| Sold by: | Barnes & Noble |
| Format: | eBook |
| Pages: | 286 |
| File size: | 608 KB |
About the Author
Read an Excerpt
CHAPTER 1
INTRODUCTION & ACKNOWLEDGMENT
INTRODUCTION
The most difficult part in writing a book is finding the right words to get started. Not only do you need to grasp the readers attention, you must also concisely describe the contents of the book.
Right from the start, I am proud to state that I am a Dillon man–I have used a Square Deal B and I am now using a XL 650 as well as some other accessories. I also use accessories from RCBS, Hornady, Lyman and Lee. From Lee I use the C-arm adjuvant reloading press and the 30-30 factory crimp. RCBS provides the rifle dies. For rifle bullets and a manual trimmer, I use Hornady. Lyman products include their turret press/powder measure, handheld chamfering/deburring tool, and their E–Zee pistol/rifle case length gage. My balance beam scale is from Redding.
The proposal that reloading can be a practical hobby has the prerequisite that you belong to a shooting sport or similar endeavor. Belonging to a shooting sport needs the production of large volumes of quality ammo. Without the need to practice and compete you become a sporadic or occasional reloader of hunting and plinking/target ammo. In comparison, if you compete in Cowboy Action Shooting or USPSA, you will need large amounts of ammo for practice and competition. When I was training for these two sports, it was common to send at least a thousand rounds down range per week and then bring several hundred rounds for competition. The drive to support my habit was the stimulus to become a regular and practical reloader.
Reloading is a continuous learning process. We often forget knowledge and methods when we don't reload regularly. It all depends whether you reload so you can shoot more freely or whether you shoot so you can get back to reloading. Reloading should be a pleasure and not an activity to "get it out of the way". I reload because I enjoy it and I can shoot more freely. Reloading is the most economical way to enjoy the shooting sports.
As a practical method, I will describe my reloading routine during a loading session for bulk pistol ammo and another session when loading rifle hunting ammo. These sessions involve the use of modern "tools of the trade". It follows that these tools cover the major subject matter of this book. The hobby reloader not only enjoys the process, he or she wants to work with great tools–as covered in Chapters 2–6. Other chapters will cover: primers, new powders, new bullet types, special topics and much more.
To clarify a point, this book is not about F Class competition that includes benchrest and long range rifle shooting. The entire basis of handloading for this class requires more equipment precision and extra techniques to yield the best rifle accuracy possible. This entire subject and equipment is not part of this book. This book is about practical reloading–the production of volume/quality pistol ammo and limited rifle hunting ammo.
ACKNOWLEDGMENT
The contents of this book cover more than my experiences during forty years of reloading. I am an organizer and have researched the subject for months over many long hours. I reviewed reloading manuals, Dillon forums, Brian Enos forums, articles from the experts and multiple shooting/ reloading forums to include: the firearms forum, the firing line forum, reloaders nest forum, handloader bench forum and many others. Included in the research was a reproduction of the proper products descriptions in manufacturers catalogs and retailers web sites. My best source of information was the Dillon web site to include the following forums: Dillon reloading equipment–Square Deal B
–XL 650
–other Dillon equipment
Dillon Reloading–Rifle calibers
–Handgun calibers
The real benefit of these Dillon forums is the fact that the expert discussant was an actual Customer Service representative. I have referred to many retail sites for these tools and reloading components. I have used and acknowledged Dillon, Brownells, Midway, Cabelas, Amazon, ebay and gunbroker.
My most important acknowledgment is the heavily footnoted and referenced portion of this book. I strongly believe that the sites, forums and authors be appropriately recognized. I have over 20 pages of references and I am proud that I am the organizer of these sources.
With this preface, I present this publication for your pleasure.
CHAPTER 2
DILLON XL 650 PRESS
Introduction
1. Blue Press specifications/prices
A–Press and casefeeder
B–Optional items
2. Powder Check
A–Dillon
B–RCBS lockout die
C–Relative significance of a double charge
3. Other Dillon XL 650 options
A–Tool holder
B–Strong mount
C–Roller handle
D–Bullet tray
E–Low powder sensor
F–Dust cover
G–Spare parts kit/spring kit
4. Lubrication
A–Materials
B–Lubrication points
5. Casefeeder
A–Plate clutch
B–Funnel adapter
C–Failure to feed
D–Jamming plate
E–Cases not entering shellplate
F–Upside down cases
6. Interruption of case and primer feed
A–Priming system
B–Casefeed system
7. Humidity
8. Reloaders shoulder
Introduction
WHAT IS A DILLON XL 650? It is a high-speed progressive reloading machine designed to load the common rifle and handgun cartridges. This machine is capable of producing up to 800 rounds per hour with the use of the XL 650 casefeeder. Dillon offers a 30 day free trial and if you purchase one, it comes with a "lifetime no BS warranty".
It is a common opinion in the shooting forums that this machine is a mechanical masterpiece and a true turnkey system. It has a short learning curve, free of wasted time from repeated tweaking and simply easy to keep running.
I reload for pleasure and so I want a press that is a joy to use. Quite simply, this press "loads and loads and loads" with the most incredible smoothness and reliability.
1. Blue Press specifications/prices
A–Press and casefeeder.
I purchase all my Dillon products thru the Blue Press catalog via on line or phone orders. The press and casefeeder sells for $785 and includes the following:
• 5 station auto indexing
• 500–800 rounds per hour
• one caliber conversion
• one 5 station toolhead
• automatic powder measure
• automatic primer system
B–Optional features include:
• roller handle($46)
• powder check system($69)
• 4 large pickup tubes($24)
• 4 small pickup tubes($24)
• spare parts kit($26)
• each additional conversion kits($78)
• extra toolhead($28)
• extra powder dies($11)
• three-die carbide dies set($66)
• flip tray($21)
• RF–100 automatic primer filler for "S and L" primers($325)
2. Powder Check
A–Dillon.
This powder check is the number one item on my list of optional items that belong in the necessity category. If you want to be safe, DON'T BE CHEAP, because this is the most important accessory in the press. You can rely on this die to warn you of a "double charge" or of a "no charge". Both of these events can ruin more than your day.
In addition it will alert you to a problem that is robbing powder in small increments which is so important if you are loading 3+- grains of fast powders for cowboy shooting. This powder check will also warn you of "stepped up cases"–a situation where a case has a high base and corresponding smaller case volume. This lower case volume is crucial if you are loading near max–a dangerous high pressure may result.
B–RCBS
The RCBS lock-out die will stop the 650 press if there is too much or not enough powder. It's major use is in double charges or absent charges(squib load). The drawback is that it works only with straight wall cases.
Other issues is that it is not a powder check that will check for small variances in powder as in stepped up cases or in powder robbing situations. It is not very useful with powder loads less than 3+- grains since it acts as an empty case.
C–Relative significance of a double charge
A double charge of Clays when you are loading 3 grains in a 38 case would give you a charge of 6 grains of Clays. I am certain that my NRV can handle this double charge. I regularly shoot 6 grains of Titegroup in my old style 44 mag Vaquero–could it handle 12 gr.? This may not be the case if using old guns or generic substitutes with poor quality steel. Either way, a double charge is just not acceptable and is an embarrassing situation for the shooter during a competition since all the participants know what happened. Here is a true experience worth mentioning.
For years I reloaded using the auto indexing Square Deal B and I upgraded to a Dillon RL 550 which does not have auto indexing or a slot for a powder check. With this background I went to a cowboy shoot and while on the firing line I had a double charge. Remember that I had gone from an auto indexing press to a manually indexing RL 550 and I admit that I had trouble remembering to index the shellplate. Needless to say I was embarrassed to the max so I called Dillon to trade my RL 550 for an XL 650. The customer agent was hesitant to make the trade since I was over my 30 day trial period. So I told the agent about my experience at the cowboy shoot but added that the range officer asked me, in plain ear shot of all to hear, which press I was using and I answered very loudly "Dillon RL 550". There was no need to say anymore–I had an XL 650 four days later at no charge and a powder check at my cost.
There are situations as serious as a double charge that are worth mentioning that can lead to disastrous results. A few are as follows:
• Unrecognized squib load
• Using the wrong powder
• Dumping powder in the wrong powder container
• Loading a round above max charge
• Forcing a pistol slide forward with a stuck case in the chamber
3. Other Dillon XL 650 options.
A–Toolholder($20–30) Holds the tools you need to service your reloader with or without wrench set.
B–Strong mount($50) A rise mount of 6 inches. Allows you to use any location on the bench instead of only the edge of the bench. It also enables the attachment of other accessories.
C–Roller handle($46) This item reduces operator fatigue, makes primer seating easy and helps in controlling the priming arm from accidental detonations(more later).
D–Bullet tray($43) A shallow aluminum tray located for economy of motion and attached to the strong mount.
E–Low powder sensor($42) It provides an audible reminder when it is time to refill the powder reservoir.
F–Dust cover($40) Not only a neat cover but it locks as well.
G–Spare parts kit($27) There are 46 parts in the XL 650 kit. Great value. Just call Dillon for any individual part and find an easy $5 charge plus shipping if the part is not on warranty. Over the years I have used these parts regularly and try to bunch my replacement orders as much as possible.
Springs are the items needed the most. They break or weaken and need to be replaced. I keep extras of the most frequently changed springs. These are as follows: (reference is made to the 6.1 version of the manual)
• casefeed arm return spring 13936 page 52
• case insert slide spring 13937 page 54(most common replaced)
• ring indexer return spring 13791 page 54
• primer locator tab spring 13624 page 55
• primer indexing arm spring 13965 page 55
There are some parts that I keep as spare since they are the ones that tend to get lost by rolling or flying away. There are three. The index ball 13891 page 54, the primer disc ball 13932 page 55, and the powder measure bell crank cube 13871 page 56. There is also one item that tends to fail and that is the micro-switch on the casefeed assembly 13779 page 57. When this switch fails, you are back to manually loading cases.
Over the years and over 300,000 rounds, other parts have failed and needed replacement. Fortunately the "no BS warranty" generally covers these parts. It is impossible to keep an inventory for all possible situations. Other than these specific parts held as backup, you need to rely on Dillon's great customer service and the US mail service.
4. Lubrication.
A–Materials.
Plastic parts erode, dissolve and split when exposed to petroleum based solvents and lubricants. Always use synthetic heavy bearing grease on the plastic parts. I use Mobil One synthetic bearing grease and a tub will cost you $9. There are many other brands and one example is the Mil-Comm TW25B synthetic grease. It is available in sizes from a 0.5 ounce syringe to an 8 ounce tub. The economical grease gun tubes are available in synthetic grease for $10 per tube. Any lubricant not free of petroleum products is not made for your press–go synthetic because it is thick and sticks to all plastic and metal parts. The only exception is the priming shaft which should be oiled with 30 weight motor oil.
B–Lubrication points.
The best video of all the points to grease is available on youtube.com. Look for "Lubrication of the Dillon precision XL 650". Generally apply the grease with a Q-tip to the following points: (easier to follow with video)
• all pivot pins–Zerk fittings with grease gun or grease holes with syringe.
• main shaft pivot pin–loosen the set screw at the bottom of the priming shaft and push the pin out ½ inch either direction
• interior of ring indexer, cam surface of ring indexer and indexer block
• primer slide cam
• lift station 1 indicator and lube the underside and the side railings that the case insert slide rides on
• underside of shellplate bolt where it contacts with the shellplate if not using the bearing kit(mentioned in upgrades)
• rails of powder measure body where powder measure rides on
• roller of connector body collar of powder measure
• primer disc pin of priming system
5. Casefeeder.
The powered casefeeder is the equipment that makes the XL 650 the quality tool that it is. Cases are fed into station one with ease and very few operational problems. Listed here are some of the minor issues that can easily be corrected.
A–Casefeeder plate/clutch. The clutch should be able to handle a standard load of 350 count 38 cases or 400 count 9mm cases WITHOUT SLIPPING. If it is slipping, tighten the two screws on the casefeeder plate. If a case locks up the rotation of the plate, the clutch should slip or it can damage the motor. Fine tuning is needed to avoid slipping during normal operation yet allow slipping when a blockage occurs.
B–Casefeeder funnel adapter. There is a white T shaped adapter that fits in the old style rectangular funnel. The new style round funnels do not need it. It is used with short cases such as 9mm that tend to jam up and plug the funnel.
C–Failure to feed. There are usually four causes. To understand this section please refer to the manual 6.1 version "casefeed body assembly" on page 52 to visualize the terms–casefeed adapter, arm, arm bushing, arm stop pin, body bushing, arm return spring and black case slide cam.
The first — once a case falls in the long tube, if it does not feed properly it is because of a problem with the casefeeder adapter(the 3 inch plastic adapter at end of tube) or the casefeeder arm bushing(the ½ inch long colored plastic insert in the arm). The usual solution is to line up the two since the connection tends to bend with use.
The second cause is a loose black case slide cam that is not pushing the arm bushing enough. Tightening the screw and repositioning the slide will resolve this issue.
The third cause is that the casefeed arm is not going back enough. This is usually because the arm spring is broken or weakened and needs to be replaced. There is also a casefeed arm stop pin that may have loosened and needs to be tightened back in its place.
The fourth cause is the body bushing(the metal piece below the arm bushing). It may be screwed in too tight and is rubbing on the arm or the plastic bushing. Simply loosening the body bushing will solve the problem.
D–Jamming plate. Cases are getting jammed between the plate and frame before they fall in the funnel. There are four solutions:
• Do not over fill the hopper(max 350 38 specials)
• Use the slow speed on the casefeeder motor
• Slide the frame metal tab under the plate out–to shorten the gap to the funnel
• Clean the rotating plate and fingers. These get sticky and it is enough to delay the case from falling in the funnel
(Continues…)
Excerpted from "Reloading a Practical Hobby"
by .
Copyright © 2017 Richard M. Beloin MD.
Excerpted by permission of AuthorHouse.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
Table of Contents
Chapter 1 Introduction & Acknowledgment, 1,
Chapter 2 Dillon Xl 650 Press, 5,
Chapter 3 Other Presses, 21,
Chapter 4 Dillon Xl 650 Upgrades, 43,
Chapter 5 Reloading Accessories, 55,
Chapter 6 Reloading Dies, 93,
Chapter 7 Primers, 112,
Chapter 8 Reloading 9mm, 125,
Chapter 9 My Experiences, 144,
Chapter 10 Ruger American Pistol(Rap), 163,
Chapter 11 New Powders, 174,
Chapter 12 Alternative And Modified Bullets, 196,
Chapter 13 Special Topics, 212,
Chapter 14 Faq's, 235,
Summary: Reloading–A Practical Hobby, 251,
Abbreviations, 253,
Footnotes–References, 257,